PRODUCTS Custom Manufactured

These products are available to be produced in dimensions and alloys to meet customer specifications.

Typical specifications as follows:

Titanium Forgings VSMPO can produce closed die forgings to customer requirements. These forgings include structural applications for airframe, landing gear, blades and hemispheres in a range of geometries with a plan area from 100cm³ to 35000 cm³. VSMPO has a range of forging presses from the most powerful 75,000 tonne hydraulic press, together with 30,000, 20,000, 4,000 and 2,000 tonne hydraulic presses and several 5,600 and 6,300 tonne hydraulic screw presses, as well as 4, 6, 13 and 23 tonne forging hammers.
Alloy	Typical Specifications
Ti6Al4V	AMS 4928, BMS 7-247, BMS 7-269, BS2TA12, BS2TA13, IGC04.40.121
Ti-10V-2Fe-3Al	BMS 7-260, AMS 4984
Ti-6Al-6V-2Sn	AMS 4943
Ti - alloys	OST 1 90000
VST 5553	BMS 7-360, MTL 3103

SEAMLESS TUBES
Application	Specification	Alloy Grades	Range
Application	Specification	Alloy Grades	diameter, mm	wall, mm	length, mm
Seamless tubes for condensers and heat exchangers according to standard specification	ASTM B 338 ASME SB 338	Grade 1 Grade 2 Grade 3	10,29-88,9	1,24-3,05	1,5-18,0
Seamless tubes according to standard specification	ASTM B 861 ASME SB 861	Grade 1 Grade 2 Grade 9	10,29-114,3	1,65-8,56	1,5-18,0
Round seamless tubes from titanium alloys	DIN 17861	Ti1, Ti2, Ti3, Ti1Pd, Ti2Pd, Ti3Pd, TiNiO, 8Mo0,3, TiAl6V4 TiAl3V2,5, TiAl6V6Sn2	6,0-114,3	0,7-8,0	0,7-6,0
Seamless, hydraulic tubes from 3,0 Al-2,5V titanium alloy, annealed	AMS 4943	3,0 Al-2,5V	2,54-50,80	0,41-2,21	1,0-8,0
Tubes from titanium alloys, seamless, hydraulic 3,0 Al-2,5V, cold-worked, stress-relieved	AMS 4945	3,0 Al-2,5V	4,75-50,77	0,41-2,21	1,0-8,0
Data sheets according to material for tube products	NORSOK standard M-630	Grade 2	10,29-114,3	0,8-8,56	1,0-18,0

Discs
Alloys
	Hydraulic Presses with power of 3MT, 30MT and 75MT
	diameter, mm		Height, mm		Weight, kg
	min	max	min	max	min	max
Ti6Al4V, Ti6Al2Sn4Zr6Mo	466	542	54	211	32	244
Alloys
	Hydraulic Screw Presses with power of 5.7MT and 6.3MT
	diameter, mm		Height, mm		Weight, kg
	min	max	min	max	min	max
Ti6Al4V; Ti6Al2Sn4Zr6Mo	120	400	20	20	4	45
Alloys
	Air-and-steam die-forging hammer
	diameter, mm		Height, mm		Weight, kg
	min	max	min	max	min	max
Ti6Al4V	150	500	20	250	5	100

VSMPO TIRUS LTD can perform a variety of engineering services on material supplied from Redditch.

VSMPO TIRUS has the ability to produce a wide range of titanium products in Ti6Al4V and other alloys.

Production begins at the sponge manufacturing stage at the AVISMA facility.

The Corporation holds over 250 certificates for quality and environmental management systems, various processes and products.